You’ll Get The Paddle!

My son’s girlfriend was pledging for a business fraternity, and she needed a paddle. Being a normal broke college student, she doesn’t have a lot of money to buy a fancy paddle. She asked if I could make one for her. No problem. I love little projects like this. It’s even made out of makore. I bought a single board last year to make a sample for a project, and I had this lonely piece of makore waiting to be made into something. The shape and lettering were copied from a picture on a website. I never trace anything, or use any kind of pantograph. I just sketch everything out by eye, and go from there. The letters were routed out freehand with a small laminate trimmer using a very cool engraving router bit. It is so stable you can practically steer it with two fingers. It sure makes projects like this a little easier. I finished it off by sanding to 220 grit, and applied my own brew of wipe-on poly thinned out with mineral spirits.

 

Image

Birdseye Maple in the Discount Bin

Anyone that really knows me can recount one of my stories extreme bargain hunting. I rarely buy anything that isn’t on sale. I spend most Saturdays finding treasures and extreme bargains at garage sales and flea markets.

Yesterday started with a trip to the lumberyard. I routinely peruse any discount or clearance bins at most retail stores. Most lumberyards have a rack of damaged sheet goods or bent and twisted lumber.

Since I am currently in the midst of building my Frank Klausz bench (and anxious to start the Roubo bench), I am always looking for good deals on any stable hardwood. After spotting a few 5/4 and 6/4 boards in the discount bin, I quickly asked about how these items are priced. First of all, let me set the stage. In this current economic free fall (in relation to the building industry), lumberyards have cut back on staff. This establishment has a warehouse that tops out at 120,000 sq. ft. With two guys manning the entire warehouse! Anyway, when I finally get the attention of a very busy warehouse man, he informs me that all of the boards start at $5 each and go up to $7 each. Seriously!

Let us just say that I rifled through the entire rack, and here are the fruits of my labor:

5/4 x 5 1/2″ wide x 9′ long – Hard Maple – $5.00
6/4 x 4 1/2″ wide x 7′ long – Hard Maple – $5.00
4/4 x 8 1/4″ wide x 8′ long – Hickory – $5.00
5/4 x 14″ wide x 7′ long – Red Oak – $5.00
4 boards 15/16 x 14″ wide x 5-7′ long – Red Oak – $5.00 each
and…….

One board 6/4 rough x 10″ wide x 10′ long BIRDSEYE MAPLE!!! – $5.00

The entire take was $48 and change including tax. By my estimates, the one birdseye board alone would cost $125-150!

It was a good day!

The First Step – Making My Own Workbench

As many woodworkers know, the first big test of your woodworking skills is to build your own workbench. Since I have over 1000sq ft of shop space, I am actually going to build three benches in total. The first will be my version of the Frank Klausz workbench. Here is an example.

this picture was borrowed

I will start with this bench. This is very similar to benches that I have used (but never owned). It will help greatly when it comes time to build the other two benches. The second will be a Roubo bench. I know that it is in great fashion to build a Roubo right now, but that’s not influencing my decision. I build quite a few odd things, and I think the leg vise with a dead man will be very useful. The third bench will be a low assembly bench with clamp and tool storage underneath.

After a trip to the lumberyard, I discovered that 8/4 hard maple was the least expensive choice. 8/4 hickory was almost as cheap. I will be using mostly 8/4 maple for the benchtop, andsome hickory for the support structure. A good portion of the legs and braces are reclaimed hickory and red oak. These are sticker pieces I’ve been given from the lumber delivery drivers through the years. They are aged, dry, and free, so I’ll use them. For the rest of the parts, I’ve glued up 8/4 hickory. After some glue up and milling, it’s time to layout the joinery for the base parts.

Cheers to my first workbench!