A New Year and a Renewed Blog

2015. What does it have in store? Who knows, but I sure do have a few goals.

Last year was filled with lots of architectural millwork production, a unique wine cellar ceiling, and a few small woodworking projects. 2015 already looks promising. I have a huge walnut desk commission, some spec furniture, plenty of ideas, and more architectural millwork projects.

This year I’m going to find a way to buy a very large jointer, finish my Klausz bench, build an enormous Shaker bench, and get the shop more organized than it has ever been.

In 2015, I’ll definitely be turning sawdust into groceries.

Safety Is No Accident – Clean Your Blades!

One of the most dangerous things a woodworker can do is to use a dull blade. It can be a table saw blade, a miter saw blade, circular saw blade, or basically any of the whirling blades that we as woodworkers regularly use. One thing that you probably do not realize is that most of the time that you think your blade is getting dull, it is not. It’s dirty. Wood resins, glues from plywood, and who knows what else builds up on the sides of the teeth of your saw blades.

My dirty table saw blade. It is a Forrest Woodworker II. This method is safe for cleaning most saw blades.

Image

Do you see the tremendous build up of gook and muck on the side of those teeth? Do like your mom told you! Brush your teeth! I prefer CMT Blade cleaner. I’ve been using it for years. I buy it by the gallon and fill up these little spray bottles. The plastic brush is from Walmart. I think it is supposed to be a dish brush. You can use your old tooth brush as well, but I like the longer bristles to get into all of the nooks and crannys.

Image

After I give it a good cleaning on both sides, I rinse it completely with hot water in my shop sink. Metal blade! Water! Yes, rinse it off and dry it with one of your old towels. After that, I immediately blow off all of the remaining water with the air hose. This gets all of the moisture off of the blade, and the hot water makes that happen even quicker. When the blade is completely dry and squeaky clean, I like to use DriCote by Bostik. It really keeps the gunk build up to a minimum.

Image

Image

Well, there you go. Clean and ready to go.

You’ll Get The Paddle!

My son’s girlfriend was pledging for a business fraternity, and she needed a paddle. Being a normal broke college student, she doesn’t have a lot of money to buy a fancy paddle. She asked if I could make one for her. No problem. I love little projects like this. It’s even made out of makore. I bought a single board last year to make a sample for a project, and I had this lonely piece of makore waiting to be made into something. The shape and lettering were copied from a picture on a website. I never trace anything, or use any kind of pantograph. I just sketch everything out by eye, and go from there. The letters were routed out freehand with a small laminate trimmer using a very cool engraving router bit. It is so stable you can practically steer it with two fingers. It sure makes projects like this a little easier. I finished it off by sanding to 220 grit, and applied my own brew of wipe-on poly thinned out with mineral spirits.

 

Image